How Deep Should a Reach-In Closet Be? The Sources Disagree

How deep should a reach-in closet be: shallow reach-in closet seen from the bedroom, with a rail of shirts and a shelf above

How deep should a reach-in closet be? Four sources publish 24 inches, and one of them means something different by it.

Closet World, Dimensions.com and Angi describe 24 inches as comfortable, typical or sufficient. Hunker calls it the standard minimum. Those are two different claims, and only one of them tells you that going below it stops working. Below 24, the three sources that publish a figure at all draw the line in three different places: 22, 20 and 18 inches.

  • 24 inWhere all four sources converge, for three different reasons
  • 22 inHunker: under this, clothes will not hang
  • 20 inDimensions.com, as narrow as it goes, if desired
  • 28 inHunker, for coats or other bulky hanging items
This is the closet, not the shelf inside it

Every figure on this page is the depth of the closet cavity, measured from the back wall forward. It is not the depth of a shelf board fixed inside it, which runs 12 to 24 inches and is covered on closet shelf depth.

The two happen to share a figure at 24, which is exactly why people mix them up and end up ordering a shelf that fills the whole closet.

A measuring sheet for your own numbers. The free Closet Layout Planner is a measuring sheet plus three layouts, five printable pages. Get the free planner

How deep should a reach-in closet be, by source

From the back wall forward

18 to 28

Four sources, one number they all publish, and four different things they mean by it. Put them on the same scale and the disagreement becomes the useful part: 24 is where everybody lands, but only Hunker treats it as the floor rather than the norm.

Where each source puts the depth of a reach-in closet, from 18 to 28 inches A depth scale running from 18 to 28 inches, with one row per source below it. Dimensions.com marks 20 inches as usable if desired and 24 as a standard comfortable depth. Closet World marks only 24. Angi publishes a range from 18 to 24 and calls 24 plenty for most. Hunker marks 22 as the point below which clothes will not hang, 24 as the standard minimum, and 28 for coats. An orange band runs down the 24 inch line, where all four sources converge, though Hunker alone calls it a minimum. 18 20 22 24 26 28 closet depth, in inches Dimensions.com Closet World Angi Hunker “if desired” under this, no hanging for coats its Standard row, 18 to 24 all four at 24 Three of them call 24 inches typical, comfortable or sufficient. Hunker alone calls it the standard minimum.

Typical and minimum are two different claims

24 in

Three sources call it normal

Closet World, Dimensions.com and Angi describe 24 inches as comfortable, typical or sufficient. Closet World adds what the depth does for the clothes: reach-ins are “typically about 24 inches deep, allowing for comfortable storage without clothes brushing against the back wall.”

24 in

One calls it the floor

Hunker writes “The standard minimum depth for a reach-in closet is 24 inches.” Read as a minimum, that figure says something the other three do not: that below it, things start failing.

Below 24

Each source draws its own line

Hunker, Dimensions.com and Angi each put it in a different place, at 22, 20 and 18 inches. Closet World publishes no figure under 24 at all.

28 in

Deeper, for coats

Hunker notes a closet meant for “coats or other bulky hanging items may need to be as deep as 28 inches.” A coat on a hanger is thicker than a shirt, and that is the whole of it.

Will it fit? Enter the depth you measured and the depth the listing publishes, and the tool tells you whether it goes in, or that it cannot tell you yet. Try it

The eight figures as a tableeach one with the exact words its source uses
Reach-in depthWhat the source calls itWho publishes it
24 in“a standard comfortable closet depth”Dimensions.com
24 in“typically about 24 inches deep”Closet World
24 in“plenty for most”Angi
24 in“the standard minimum depth”Hunker
22 inbelow it, “isn’t deep enough to allow hanging clothes”Hunker
20 in“as narrow as 20 can be used if desired”Dimensions.com
18 to 24 inthe Standard row of its size tableAngi
28 infor “coats or other bulky hanging items”Hunker
How deep should a reach-in closet be: shirt on a hanger seen from the side, showing how far it projects from the back wall
A coat on a hanger is thicker than a shirt, and Hunker allows up to 28 inches for one.
The figures next to this onethe shelf, the width, and what fits in the depth

Alongside this one: closet shelf depth for the board inside the closet, and reach-in closet dimensions for the width and the rod heights that go with this depth. To take the measurement yourself, how to measure a closet says exactly where to stop the tape, and why the depth gets taken twice.

What fits in that depth

Once you have measured it, which systems fit a reach-in takes it from there, and closet systems covers the four families. Taking the door off is a separate option: open closets. If the closet is under four feet wide as well as shallow, see narrow closet layout.

Questions people ask3 questions

Is 24 inches deep enough for a reach-in closet?

Three of the sources above call it typical, comfortable or sufficient, and a fourth calls it the standard minimum.

What is the minimum closet depth to hang clothes?

Hunker says a closet under 22 inches “isn’t deep enough to allow hanging clothes.” Dimensions.com allows 20 inches if desired, and Angi’s table lists 18 to 24 inches for a standard reach-in.

How deep for a coat closet?

Hunker gives up to 28 inches for coats or other bulky hanging items.

Order from your own numbers

Print the measuring sheet, take it to the closet, and buy from what you measured instead of from an average. Five printable pages, including the standard dimensions.

More closet fixes, one problem at a time, in our closet organization guide.

Similar Posts